Polishing & Grinding Job Requests At AB Polishing Sydney

  • We have a 5 year old Marble island bench top & kitchen bench top that I am interested to get polished.  Not 100% sure if it’s marble? Avalon Beach, NSW.
  • I would like a quote to polish our Concrete Floors in our apartment. Sydney, NSW. We would like two bedrooms the lounge room and hallway. The dims are:
    lounge          4230mm x 4920mm
    hallway         5757mm x 1100mm
    main bedroom            4570 mm x 3630mm
    second bedroom          3410mm x 3070mm Thanks. Marickville, NSW
  • Budget cost to polish approx. 600m2 existing Concrete Slab in city office block – works out of hours please
  • We have granite paves that possibly needs a light Grind, Polish and Seal with a non slip finish we can provide photos. The paves are cemented in position. Sydney
  • Good morning, I’m just enquiring to get a quote to get our Marble Floor Buffed and Polished. Thank you in advance. Sydney
  • Hi, Wanting to get a quote for Polishing our apartment entrance including a staircase. Address is 516 Sydney Road bagowlah. Entrance between garden and tile ship. Unsecure building so welcome to come any time to quote. Strata plan 11988.
  • Hi there, We have a existing commercial warehouse interior we are working on and looking at using your services. We have a existing Concrete Slab and wanting to Polish it as an interior. Warm Regards. Redfern, Sydney.
  • Need quote and discuss options to Polish and Seal 50smq Concrete Floor for residential property.
    • Existing 1960th ground level concrete slab.
    • All carpet and vynil tiles have been removed.
    • Exposed concrete slab to whole area.
    • Please give me a call. Thanks. Sydney
  •  Please supply quote for Concrete Polishing, 10 mts x 7mts. How many days notice do you require? . Thanks. Mt. Victoria. I have about 100sqm of concrete
  •  Looking for Concrete Polish done. How much do you charge per sqm. Thank You. Homebush, Sydney.
  • Need a quote for Polishing Concrete Garage approximately 36 square metres. Sandringham, NSW
  • Hi there, Want to meet someone for a quote to Polish 2 x lift floors that are marble. Thanks. Lane Cove, NSWI would like to get my porch laid with sandstone if possible so would like a free quote.
  • I would like to get my porch laid with sandstone if possible so would like a free quote.
  • Just after a price on a minimal grind on a existing washed ag patio area 70sqm. Wash didn’t come up well and a need to take a waste down about 10mm over about 4sqm. Burraneer, NSW
  • Have outdoor steps, which are breaking away,  need the removed and new ones to be replaced in the Concrete Flooring. Ryde, Sydney
  • Hi there, i have a small office which is 7.5m x 7.6m.  There is also 17 steps at 1.2m wide and a small landing which is 1.2 x 1.2m. The main area is up the stairs.  I’d like to get a price to get the Concrete Polished/Grinded.  Can i organise someone to come and provide a quote? Frenchs Forest, Sydney
  • Looking for Concrete Grinding asap for 5 units. Ropes Crossing, NSW
  • Hi, Could I get an estimation of how much Indoor Concrete Flooring would cost me? Area: 10m x 12m roughly. Auburn, Sydney
  • Would like a quote to Grind/Polish/Seal Driveway approx. 57m2 job location. Kingsford NSW
  • Polishing required for small apartment block – hallway and stairs. We need rel.
  • We have a 11 sq m outdoor concrete slab that requires Grinding and Polishing. we would like a quote. Thanks. Sydney.
  • We have a piece of granite left over from a kitchen renovation, that we’d like re-edged.It is approx 900mm x 500mm.Would you be interested in quoting? Windsor, NSWMy costumer has a slate or cement step I’m not
  • My costumer has a slate or cement step I’m not to sure what it is she wants it polished its about 900 more or less by 300. Bull nosed. Just wondering how much you guys charge ? Thanks. Mosman, Sydney
  • Hi,
    could you provide quote for Grouting, Sealing and Polishing 58m2 of concrete in garage. Thank you. Russell Lea
  • Our new house is due to be completed in 8-10 weeks and we would like to get a quote for Polished Concrete for the house.We would like two separate quotes.
    1. For the whole house
    2. Just for the hallways, kitchen and living/dining area.I have a floorplan or if you would like to see the house I can get access for you through my site supervisor. Newtown, Sydney
  • 40 sq m of Terrazzo Floor requires. Wentworth Falls, NSW
  • 120 square metres of floor area.  We are taking up slate and carpet and wanting to go polished concrete. The Oaks, Sydney
  • Looking to see if someone could profile or clean concrete garage floor before epoxy paint is applied. Kellyville, Sydney
  • Drummy step in first flight of stairs, we also need cleaning of the whole staircase. Naremburn
  • Hi, I would like to get a floor and bathroom ( both marble ) polished ASAP. Drummoyne, Sydney
  • Hi! I am making a concrete counter top and need someone to do the polishing for me – it is a cast in place 50 or 70mm piece. The floor will be concrete for the job, and the cupboards will not be installed. It is in a house. It is approximately 3m long and 1.6m wide, with two legs 1600×900. Glenmore Park.
  • Tile polishing job approx 15m2
  • I need an existing Concrete Floor ground to a polished finished and sealed with a clear waterproof finish. area is approximately 35m2 and probably a difficult shape with some areas of concrete being fairly rough. Normanhurst, Sydney
  • I’m after sandstone to cap a letterbox. It is in 2 sections 60cm X 36cm and 86cm X 36 cm. Measures are approximate. We would have to look at the stone to decide colours and thickness etc. Thanks. Lugarno, Sydney
  • Hi – I have a 3 bedroom home with combined living/dining/kitchen and I would like to get a quote on Stone Polishing Sydney the concrete slab under the existing carpet. Kurrajong
  • Have large concrete deck wondering at cost to maybe polish rather than tile. Bullaburra
  • Hi There! Need to have a small area of my bathroom polished asap. Bottocino Marble, around 2 square m. Thx. Warriewood
  • A quick quote on a kitchen floor about 5m sq.
  • 40msq around pool , maybe a topping on old cement / stone + a desired colour. Thanks. Werrington Downs
  • Hello,
    We would like to get a quote to polish the new slab being poured for our house addition.  This is likely to happen this week or next, as such your earliest reply is requested.
    The area is approximately 100sqm, plans can be supplied if requested.
    I look forward to your earliest reply.
  • I have a room under my house that is approx 2.1 X 2.5M. With 3 stairs that are seperate. Plus a 2 stairs that are approx 1M x 0.38M. Then there is a narrow passage that is approx 4.6M x1M (This are I am not sure about.
    Is this a job you would consider, if so what would the price be to polish the concrete? Thanks. Castle Cove, NSW
  • We are re fitting a General Pants store in Mid City and are needing to get a proportion of the floor grinded and polished, roughly 8m2.
  • Could you please provide me with a quote for these works.
  • I’d like a quote for 3 rooms which are flood prone please. Thanks. Bilogola, NSW
  • Quote to polish natural stone floor
  • I want to rip up the carpets at my place and polish the concrete underneath, approx. 100m2. Thanks. Philip Bay, 2036
  • Good afternoon
    im just looking at removing my tiles from the ground floor of my house and grinding and polishing the existing concrete slab, is this something you guys do??
    roughly what would the cost be
    its around 70m2. Gleenwood, NSW
  • Hi there
    We’d like to get a quote please on getting our garage floor polished/sealed. We’re converting it into anrumpus room.
    Thanks. Stanhope Gardens.
  • Hi
    I have renovations underway and seeking a quote to polish/hone two concrete slabs. Both slabs are under cover but outdoor. The Veranda is a suspended slab 9900 x 1800 including 8 steps. The ground level Patio slab is 7000 x 3800 with 2 steps.
    Im seeking the more natural ‘salt n pepper’ look not a highly polished finished.
    Thank you, Baulkham Hills, NSW
  • Hi,
    We are looking at getting our existing concrete alfresco and porch (approx. 60m2) Polished Concrete and wondering if this is possible and the approx. cost.
    Thanks. Middleton Grange
  • Have new Flamed Granite Pavers and six stairs plus honed vertical pillar capping that needs Cleaned and Sealed prior to grouting.  Please contact me to arraign a quote. Surry Hills, NSW
  • Hi want a quote for Polishing approx 100 sq m of Internal Slab Floors including garage. Please consider that walls are painted and kitchen has been installed. Oran Park, NSW
  • Hi
    I have a broken Terrazzo step in the foyer of our apartment block. Can you quote to replace the entire step slab. The dimensions are 1120 x 300
  • Hi wondering if you come out to beecroft to provide us with a quote for a downstairs area. Thanks
  • I need a quote for a small area of Limestone Tile Polishing on an external balcony.
    Also a small area in two marble bathrooms of Grouting.
  • Hi there, I have two old marble topped and cast iron tables, one is 75 cm x 122 cm and the smaller one is 92 x 46 cm. the smaller one is cracked. Can you bring these pieces of marble back to life? thank you